The Light Source Mega-Quick Pipe Splice for 1-1/2" Sch 40 Pipe Black

Description

The Light Source Mega-Quick Pipe Splice for 1-1/2" Sch 40 Pipe Black. Condition is Used. Shipped with USPS First Class.
This was installed in an overhead lighting grid for about a year before I unfortunately had to take it down to move from the space. Selling off many other components used...See my other listings as well!!
Extremely easy to use, holds up very well, and looks MUCH cleaner than connections that go around the pipe.
Inside Diameter: 1.5"
Outside Diameter: 1.9"
Hex Key Size: 1/4"
Tighten to 30 ft/lbs.
Weight: 15 oz.
Working Load Limit: 600 lbs horizontal,
not rated for vertical use
.
Dimensions: 8.25" long, center piece is 1" Wide
Per the manufacturer:
"Quickly joins two pipes in line together without drilling or threading for permanent or temporary installations. The Mega-Quick Pipe Splice is the same outside diameter as the pipe for a nice flush look and feel. Install by loosening the set screw one half turn with a quarter inch hex key to open the splice. Align the set screw so that it will be on the side of the pipe joint. (This will give the maximum strength to the joint.) Pinch the bars together at one end, and insert the splice into the first pipe. Then pinch the other ends of splice together and insert the splice into the second pipe. Slide the pipes tightly toward the splice and tighten the set screw securely with the one quarter inch hex key. Bolts should be tightened to about 30 foot pounds."