JauoPay 48V 1000W Electric Bicycle Conversion Kit LCD 26" E-Bike Rear Wheel

Description

JauoPay 48V 1000W Electric Bicycle Conversion Kit 26" Rear Wheel 28mile/h (45km/h) High Speed with LCD Display
Key Features:
1. 48V 1000W super power Brushless Gearless Hub Motor.
2. Restricted to 750W and 24 mph by default as a road-legal kit.
3. Works with all pedals, including Speedplay and Eggbeaters.
4. Rare-earth metal magnet are used in the motor to efficiently produce large power.
5. Dual Mode Controller, Motor works under Hall effect and non-Hall effect, extend life for electric bicycle.
(If the components break down, controller will switch into non-hall effect mode, the motor will still be working.)
6. Can be swap two power modes between "FULL POWER MODE" and "ROAD LEGAL MODE"
The 1000W system requires a 48 Volt electrokinetic cell battery with a nominal capacity not less than 11.6Ah.
Specification:
Top Speed: 28Mph under
"FULL POWER MODE", 24 Mph under
"ROAD LEGAL MODE"
Frame Diameter: 22.56" (57.3 cm)
Suitable for 26" Bicycle Wheel
Frame Width: 0.94" (2.4 cm)
Suitable for 26" x 1.95"~2.125" Tires
Motor Diameter: 9.84" (25 cm)
Motor width: 1.18" (3 cm)
The 27 mm high magnetic steel provide high stability of motor power.
Dropout: 5.31" （13.5 cm）
M14 bolt size of axle
Package Include:
1x Brushless Gearless Rear
Motor Hub
Wheel
1x Motor Controller
1x Pedal Assist Crank Sensor
1x Cable Ties & Plastic Coil
1x Pair of Twist Throttle
1x Pair of Brake Handles
1x LCD Display
1x User Manual