Hi-accuracy 0.01% Hart Loop Calibrator DCI Source Analog Transmitter 3.5''TFTLCD

Description

Note: we'll ship this item via
express mail service
to USA, Canada, Australia,
New Zealand, Ireland, Austria, Belgium, Denmark, Germany, France, Finland, Luxemburg,
Malta, Norway, Sweden, Swiss, Spain, Italy, UK, Japan, Korea,Thailand, Malaysia, Indonesia,
Philippine, Singapore.
Clients from other countries pls contact us in advance to confirm different shipping charges before you bid.
Basic function
s
:
3.5’’ TFT LCD
Protection grade: IP65
Back light: yes
Brightness adjustment: yes
25%, 100% step output: yes
Automatic ramp: yes
Automatic step: yes
mA, % switch the display: yes
Auto power-off: yes
Power adaptation function: yes
Battery low display: yes
Work temperature and Humidity: 0-50C, =<80%RH
Storage temperature and Humidity: -25-60C, =<90%RH
Insulation impedance: between measuring and output terminals DC500V/50MΩ or bigger.
Power supply: 4x1.5V AAA batteries (NOT INCLUDED)
Size: 206x98x70(mm)
Weight: about 600g
Optional
PC online communication: compatible with IR isolation USB serial communication interface
Optional
Support SCPI commands, can realize remote control by the device driver software
Electrical safety: EN61010-1: 2001
Insulation: DC500V/50MΩ
EMC: EN61326-1: 2006
Source:
DC current range: 0.000-22.000mA
Accuracy, +-(% of the set value +% of range): 0.01%+0.015%
Resolution: 1uA
Analog transmitter (Simulate) range: 0.000-22.000mA
Accuracy, +-(% of the set value +% of range): 0.01%+0.015%
Resolution: 1uA
External power supply: 5-28V
Measurement:
DC current range: -4.000-33.000mA
Accuracy, +-(% of reading +% of range): 0.01%+0.01%
Resolution: 1uA
DC voltage range: -2.000-28.000V
Accuracy, +-(% of reading +% of range): 0.01%+0.01%
Resolution: 1mV
Loop power supply range: 24V
The max. Current: 22mA
Driving ability: NO HART resistance of 1KΩ; HART resistance 750Ω.
Built-in HART modem for HART function below.
Read information
Read label, description symbol and calibration date
Read long label
Write in PV range (upper limit and low limit)
IN/OUT fixed current mode
Adjust zero drift
Fine adjustment for DAC zero (mA output: 4mA)
Fine adjustment for DAC gain (mA output: 20mA)
Can save 20 setting files for HART device; can upload the files to PC via software (
optional
)
Standard accessories:
test leads, industrial test conductor lines, clips, 2pcs fuses, PDF manual, bag.
Optional accessories:
hook leads, PC IR communication module, power adapter (DC6V), CD.