For Mercedes SLK R171 Car Radio Adapter Fibre Optics Adapter Harman Kardon Sound

Description

Important note for customers outside the EU!
Any applicable import duties, taxes and fees
are not in the item price or den
Shipping costs included.
The buyer is responsible for this
responsible for fees.
Important notes before buying:
1. For vehicles with
Harman Kardon
sound system
2. For vehicles with Comand APS NTG2 / NTG 2.5 factory navigation
3. For vehicles without Comand 2.0 / 2.5 factory navigation
4.
not
for vehicles with D2B Optical Bus System
Fiber optic / MOST bus adapter
for
Mercedes
If you have an amplifier in your vehicle
factory installed
have which is controlled via fiber optic cable, so you can
this one with
our adapter to an aftermarket radio
Connect chinch outputs.
If you don't have cinch outputs on your retrofit radio,
so you can use a high-low adapter (available from us for 19 euros)
connect to the speaker outputs. This makes the
speaker outputs chinch outputs.
All you have to do on the adapter itself is permanent plus, ground and
Ignition plus (alternatively the remote cable of the retrofit radio)
connect.
Fitting for following vehicles:
Vehicle model:
Construction year:
- CLK (W209) 2005 -> 2009
- CLS (C219) 2009 -> 2012
- E Class (W211) 2009 -> 2012
- SLK (R171) 2009 -> 2012
- SL (R230 Facelift) 2006 -> 2011
Visit my ebay shop: acr-hof
If you have any questions about the product
have, so write us an Ebay message
or use the phone number or
Email address below in the
"Seller's Legal Information"
>
"complete information"
You can reach us at the following times:
Tuesday - Friday 10 a.m. - 6 p.m
Saturdays 10 a.m. - 2 p.m
DISCONTINUED WITH
are not in the item price or den Shipping costs included. The buyer is responsible for this responsible for fees. 1. For vehicles with Harman Kardon sound system 2. For vehicles with Comand APS NTG2 / NTG 2.5 factory navigation 3. For vehicles without Comand 2.0 / 2.5 factory navigation 4. not for vehicles with D2B Optical Bus System If you have an amplifier in your vehicle factory installed have which is controlled via fiber optic cable, so you can this one with our adapter to an aftermarket radio If you don't have cinch outputs on your retrofit radio, so you can use a high-low adapter (available from us for 19 euros) All you have to do on the adapter itself is permanent plus, ground and Ignition plus (alternatively the remote cable of the retrofit radio) Vehicle model: