Chrome Shocks - Eye / Clevis - 321mm (12 5/8") - Honda CB360T/400F/500T/550

Description

Chrome Shocks - Eye / Clevis - 321mm (12 5/8")
Reproduction chrome rear shocks for vintage Honda's from the 70's. These have 5 step preload adjusters just like the stock ones. Lower clevis type mount is threaded for M10 bolts. Upper eye mount already has the 14.5mm rubber bushing installed. These can be used on many of the Honda CB's and custom bikes! Remove one shock at a time and you can replace those rusty old shocks in minutes! These shocks are reproductions for the models listed below. They might fit on other years of the CB/CL/CJ360 as well as many other years and models, please check the dimensions below.
Sold as a pair.
NOTE: Please measure your existing shocks prior to ordering so you know they'll work with your application. These shocks may need a washer on both sides of the bushing if there is any free play after flange nut is installed.
Replaces Honda Part Number: 52400-375-611,
52400-375-000,
52400-404-013
Dimensions:
Length: 321mm (12 5/8") measured from center of mounting points.
Diameter of springs = 52mm (2")
Overall Length = 13 7/8"
Inner diameter of upper rubber bushing = 14.5mm
Threaded Mounting Hole: M10
Distance between clevis: 19.2mm
Fits Honda:
CB360T - 1976 (Use from Frame SN 2217587 and later)
CB400F Super Sport - 1975-1977 (1975 Shock was 1/4" shorter)
CB500T - 1975-1976
CB550F Super Sport - 1977 (can be used on earlier models '75-'76)
CB550K - 1977-1978
4into1motorcycleparts
•
Store Policies