-40%
12 Volt Power Adapter for 2018 2019 2020 2021 Jeep Wrangler JL and Gladiator JT
$ 11.52
- Description
- Size Guide
Description
12 Volt Power Adapter for 2018 2019 2020 2021 Jeep Wrangler JL and Gladiator JTVehicle Specific Design
Unlike one size fits all wiring harnesses, our Opall12 Volt Power Adapter was engineered for use with JL Wranglers. Compatible with 2018 2019 2020 Jeep Wrangler JL & Gladiator JT. It is compatible with both two and four door models, regardless of trim level.
This wiring harness adds an inline fuse and connection point to your factory 12-volt power outlet. You can conveniently connect a CB radio, auxiliary lighting, radar detector, portable GPS or other accessory to this Quadratec 12 Volt Power Adapter.
NO SPLICING REQUIRED
It's a direct plug-n-play solution that requires no additional modification. This user-friendly design allows you to easily power the accessories in your Jeep.
INSTALLATION INSTRUCTION
1.Using a Trim stick or flat edge screw driver, remove the dash panel below the steering column.
2.Unsnap the upper heater control panel and unplug the wiring.Remove the panel.
3. Using a phillips screw driver, remove the screw holiding the window control panel.
4. Fold the panel forward.Unplug the gray connnector on the power port located on the drivers side of the window control panel.
5.Take the gray connnector and plug it into the large white connector of the power tap.
6.Plug the small gray connector on the accessory power tap back into the power port on the window control panel.
7. Pull back the carpet on the passenger side of the console.Remove the plastic cap covering the console bolt and remove the bole. This will allow access for the terminal block to the fed through.
8.Route the white termial block and fuse holder on the power tap down through the small hole in the lower center section of the dash toward the passenger side coner of the dash as highlighted.(Take your time and have patience, it is a tight fit)
9.The white terminal block will end up under the carpet at the bottom of the console.This will be an easily accessible location for any future connnections you need to make.
10.Reassemble the dash.
▶.
We accept payment via Payoneer.
▶.
S&H will be determined based upon the SHIP TO address.
▶.
Please list your special requests (color, packages, etc.) in the NOTES SECTION when you make payment.
▶.
Items will be shipped within 1 business day when we received payment.
▶.
We only ship to confirmed ebay addresses. Your ebay address MUST MATCH your Shipping address.
▶.
We accept 60 days return guarantee for all Items If you are unsatisfied with something you bought from us, you may send it back within 60 days of receipt, and we shall be happy to exchange or refund.
▶.
Leave a message note in returned box quoting your item(s) ID and buyer ID
.
▶.
All returned products must be in their original condition and packaging. Unfortunately, if products have been assembled or modified, we cannot take them as returns.
▶.
It is important that we know when your return is expected. Please save your return tracking number or post receipt, and email it to us. We need this in case there are any issues during transit.
▶.
Refund will only be issued upon our receipt of the returned parcel. Please allow 2 working days for us to process with your return
▶.
Welcome to our store! We are a professional worldwide wholesale company, with our own factory located in China.
We will reply your message within 24 hours Mon-Sat, and 48 hours on Sunday
.
▶.
We maintain high standards of excellence
and strive for 100% customer satisfaction!
Feedback is very important to us.
▶.
Pls contact me first before you leave Neutral
or Negative
feedback. i will do my best to solve the problem, thanks!